An In-depth Guide on the best way to change a Flat Tyre
The process of replacing a tire isn't difficult. It doesn't require the strength or the upper body strength of a weightlifter to complete the task. It's a skill that can be learned that anyone can master. Here's a tutorial on how to replace the tires on your car with ease.
How to Change a Car Tyre?
Some tools come with the vehicle. Others, like those that catalyze the change of tires, require a purchase in advance. Below, we've provided a few tools, which will make the job easy followed by the steps needed to change the car tire.
You'll need the following tools to replace a tire:
Vehicle's manual: This manual provides important information essential to replace a tire. The manual provides vital, but not too little, information on the kind of wrench to fit the bolts and nuts mounted on the vehicle.
Lug Wrench: This wrench can be used to tighten and loosen the lug nuts that are on the wheel.
Spare Tyre: To repair the damaged tire. Contact roadside assistance in your area if you don't have a spare tire.
Jack: A jack is used to lift the vehicle several inches in order that the tire may easily be swapped. Today, there are numerous kinds of jacks in the market. All automakers offer the jack in their vehicles.
Steps to Change Car Tyre:
1. Find a safe location
If you find that your tyre is not in good condition, it is crucial to get it off the road. Azteca Towing is advised not to turn too fast since it's dangerous for the driver and other cars that are on the road. Next, locate an area that is safe to park your car, then exit and either replace the flat tire with the spare or call Phoenix Towing. You should ensure that there is enough space between the car and the road.
2. Turn on the parking lights
If you switch to the hazard lighting and letting the other motorists that you are there. They'll be able to see a glimpse of the flickering lights from a distance, and you are able to change the tyre with confidence.
3. Remove the wheel covers
A lot of tyres for vehicles are covered with wheel covers. The covers need to be removed prior to attempting to replace the destroyed tire. The vehicle's manual should be helpful at this point. Be aware that different vehicles come with different settings for wheel covers.
4. Halfway through it, loosen the Lug Nuts
The lug nuts should be completely loose prior to hoisting a vehicle using a jack. This is because when you raise the vehicle first the wheel will keep turning. Use the lug wrench to loosen the lug nuts. Make sure you utilize the right size side of the wrench.
5. Place the Jack in the proper position. Jack uses wooden Pieces of Wood
Identify a good jacking spot underneath your vehicle. This is the location where the jack will be connected to the car. The jack could be put on the wooden pieces. Attach the jack to the spot and elevate the vehicle until you witness tiny gaps between the earth and the tire.
6. Eliminate the Lug Nuts Completely
Unlock the lug nuts with the aid of a wrench. Then, eliminate all lug nuts.
7. Replace the flat Tyre with a Spare Wheel
You will need to remove the tire with a flat on the frame, and then replace it with a spare.
If you're not sure enough to change the flat tire for a better one, you could seek assistance from a family member or an operator of a roadside assistance phoenix.
https://www.google.com/maps?cid=17853883881691704729
Azteca Towing
411 S 31st Ave, Phoenix, AZ 85009
602-483-4034